Documentation

This is machine translation

Translated by Microsoft
Mouse over text to see original. Click the button below to return to the English verison of the page.

gensurf

Generate Fuzzy Inference System output surface

Syntax

gensurf(fis)
gensurf(fis,inputs,output)
gensurf(fis,inputs,output,grids)
gensurf(fis,inputs,output,grids,refInput)
gensurf(fis,inputs,output,grids,refinput,points)
[x,y,z] = gensurf(___)

Description

gensurf(fis) generates a plot of the output surface of a given fuzzy inference system (fis) using the first two inputs and the first output.

gensurf(fis,inputs,output) generates a plot using the inputs (one or two) and output (only one is allowed) given, respectively, by the vector, inputs, and the scalar, output.

gensurf(fis,inputs,output,grids) allows you to specify the number of grids in the X (first, horizontal) and Y (second, vertical) directions. If grids is a two element vector, you can set the grids in the X and Y directions independently.

gensurf(fis,inputs,output,grids,refInput) allows you to specify a reference input, and can be used if there are more than two outputs. The length of the vector refInput is the same as the number of inputs:

  • Enter NaNs for the entries of refinput corresponding to the inputs whose surface is being displayed.

  • Enter real double scalars to fix the values of other inputs.

gensurf(fis,inputs,output,grids,refinput,points) allows you to specify the number of sample points on which to evaluate the membership functions in the input or output range. If points is not specified, a default value of 101 is used.

[x,y,z] = gensurf(___) returns the variables that define the output surface and suppresses automatic plotting for any of the previous syntaxes.

Examples

collapse all

Load a fuzzy inference system and plot the output surface.

a = readfis('tipper');
gensurf(a)

Load a fuzzy inference system with two inputs and two outputs.

a = readfis('mam22.fis');

Plot the surface for the second output.

gensurf(a,[1 2],2)

Load a fuzzy inference system with four inputs and one output.

a = readfis('slbb.fis');

Plot the output surface from the second and third inputs to the output. Fix the first input at -0.5 and the fourth input at 0.1.

gensurf(a,[2 3],1,[20 20],[-0.5 NaN NaN 0.1])

See Also

|

Introduced before R2006a


Was this topic helpful?