Documentation

This is machine translation

Translated by Microsoft
Mouse over text to see original. Click the button below to return to the English verison of the page.

beat2range

Convert beat frequency to range

Syntax

  • r = beat2range(fb,slope)
    example
  • r = beat2range(fb,slope,c)

Description

example

r = beat2range(fb,slope) converts the beat frequency of a dechirped linear FMCW signal to its corresponding range. slope is the slope of the FMCW sweep.

r = beat2range(fb,slope,c) specifies the signal propagation speed.

Examples

collapse all

Assume that an FMCW waveform sweeps a band of 3 MHz in 2 ms. The dechirped target return has a beat frequency of 1 kHz. Compute the target range.

slope = 30e6/(2e-3);
fb = 1e3;
r = beat2range(fb,slope)
r =

    9.9931

Related Examples

Input Arguments

collapse all

Beat frequency of dechirped signal, specified as an M-by-1 vector or M-by-2 matrix in hertz. If the FMCW signal performs an upsweep or downsweep, fb is a vector of beat frequencies.

If the FMCW signal has a triangular sweep, fb is an M-by-2 matrix in which each row represents a pair of beat frequencies. Each row has the form [UpSweepBeatFrequency,DownSweepBeatFrequency].

Data Types: double

Slope of FMCW sweep, specified as a nonzero scalar in hertz per second. If the FMCW signal has a triangular sweep, slope is the sweep slope of the up-sweep half. In this case, slope must be positive and the down-sweep half is assumed to have a slope of -slope.

Data Types: double

Signal propagation speed, specified as a positive scalar in meters per second.

Data Types: double

Output Arguments

collapse all

Range, returned as an M-by-1 column vector in meters. Each row of r is the range corresponding to the beat frequency in a row of fb.

More About

collapse all

Beat Frequency

For an upsweep or downsweep FMCW signal, the beat frequency is FtFr. In this expression, Ft is the transmitted signal's carrier frequency, and Fr is the received signal's carrier frequency.

For an FMCW signal with triangular sweep, the upsweep and downsweep have separate beat frequencies.

Algorithms

If fb is a vector, the function computes c*fb/(2*slope).

If fb is an M-by-2 matrix with a row [UpSweepBeatFrequency,DownSweepBeatFrequency], the corresponding row in r is c*((UpSweepBeatFrequency - DownSweepBeatFrequency)/2)/(2*slope).

References

[1] Pace, Phillip. Detecting and Classifying Low Probability of Intercept Radar. Artech House, Boston, 2009.

[2] Skolnik, M.I. Introduction to Radar Systems. New York: McGraw-Hill, 1980.

Introduced in R2012b


Was this topic helpful?