Rotational damper with variable damping coefficient
Couplings & Drives/Springs & Dampers
The block represents a rotational viscous damper with a variable damping coefficient. A physical signal input port provides the magnitude of the damping coefficient. The magnitude of the damping torque is equal to the product of the physical signal input and the relative angular velocity between the two rotational conserving ports, R and C. A minimum damping coefficient prevents non-physical negative damping values.
The damping torque satisfies the following expression:
The parameters are:
T — Torque transmitted through damper
B — Viscous damping coefficient
ω — Relative angular velocity measured between the two rotational conserving ports according to
ωR — Angular velocity of rotational conserving port R
ωC — Angular velocity of rotational conserving port C
The block applies equal and opposite damping torques on the rotational conserving ports. The sign of the damping torque acting on port R is equal to the sign of the relative angular velocity. A positive relative angular velocity corresponds to a positive damping torque acting on port R, and a negative damping torque of equal magnitude acting on port C.
The block represents only viscous damping
The value of the damping coefficient must be equal to or greater than zero.
Minimum value allowed for the damping coefficient. The physical
signal input saturates below this level. The parameter must be greater
than or equal to zero. The default value is
The default unit is
Specify the desired initial values of the block dynamical variables. These variables guide model assembly at simulation time zero. When two or more variables conflict with each other, the priority setting determines which of the variables to satisfy. For more information, see Set Priority and Initial Target for Block Variables.
Variables that you can specify include:
t — Spring torque
w — Relative rotational
|B||Physical signal input port representing the variable damping coefficient|
|C||Rotational conserving port|
|R||Rotational conserving port|