Main Content

Ideal Torque Sensor

Torque sensor in mechanical rotational systems

  • Ideal Torque Sensor block

Libraries:
Simscape / Foundation Library / Mechanical / Mechanical Sensors

Description

The Ideal Torque Sensor block represents a device that converts a variable passing through the sensor into a control signal proportional to the torque. The sensor is ideal because it does not account for inertia, friction, delays, energy consumption, and so on.

Connections R and C are mechanical rotational conserving ports. Connect this sensor in series with the block where you want to measure the torque because torque is a Through variable (for the mechanical rotational domain). The sensor constrains ports R and C to allow no motion between them, therefore connecting the sensor in parallel may affect the simulation results because it is analogous to adding a bypass connection line between the connection points. A series connection within an existing line does not affect the simulation results and provides an accurate measurement.

Connection T is a physical signal port that outputs the measurement result. The block positive direction is from port R to port C. This means that positive torque applied to port R (the sensor positive probe) generates a positive output signal.

Ports

Output

expand all

Physical signal output port for torque.

Conserving

expand all

Mechanical rotational conserving port associated with the sensor positive probe.

Mechanical rotational conserving port associated with the sensor negative (reference) probe.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2007a