Main Content

Connection Port

Connection port for RF subsystem

  • Connection Port block

Libraries:
RF Blockset / Equivalent Baseband / Input
RF Blockset / Circuit Envelope / Utilities

Description

The Connection Port block, placed inside a subsystem composed of RF Blockset™ Equivalent Baseband blocks, creates an open round physical modeling connector port open round physical modeling connector on the boundary of the subsystem. When it is connected to a connection line, the port becomes solid Solid physical modeling connector.

You connect individual blocks and subsystems made of RF Blockset Equivalent Baseband blocks to one another with connection lines instead of normal Simulink® signal lines. These blocks and subsystems are anchored at the open, round physical modeling connector ports Round physical modeling connector ports. Subsystems constructed out of RF Blockset Equivalent Baseband blocks automatically have such open round physical modeling connector ports. You can add additional connector ports by adding Connection Port blocks to your subsystem.

Parameters

expand all

PMC Port mask

PMC_Port: Physical Modelling Connection Port block for subsystems

This field labels the subsystem connector port created by this block. Multiple connector ports on the boundary of a single subsystem require different numbers as labels.

Use this parameter to choose on which side of the parent subsystem boundary the Port is placed.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2007a

expand all