Accelerating the pace of engineering and science

Integrating Measured Data with Simulations for Automated Model Calibration


Shripad Chandrachood, MathWorks
Graham Dudgeon, MathWorks

As a part of ensuring power system reliability through accurate system simulation, math models of generating stations are periodically recalibrated through comparison with field test data. This is not a trivial task, and the time and cost associated with manually performing such verification can be significant.

The introduction of synchrophasor technology provides an additional layer of insight into system operation. Synchrophasor measurements provide several benefits for enhancing a model calibration effort, including:

• Additional high accuracy measurements for comparison against simulation
• Reduced model complexity, and hence simulation time, by allowing model components to be replaced with a data-driven component
• Model verification of online phenomena that may not be captured with offline field testing

In this webinar we demonstrate how you can use MATLAB and Simulink to automate the process of model calibration, thereby significantly reducing the resource required to perform these tasks.

About the Presenter: Shripad Chandrachood is an Applications Engineer at MathWorks with a focus on power systems simulation using MATLAB and Simulink. Prior to joining MathWorks in May 2007, Shripad worked as an Operations & Control Engineer with the TATA Power Company based in Mumbai, India. He holds Bachelors in Electrical Engineering from the University of Pune, India and Master of Science in Electrical Engineering from the University of Alabama, Birmingham.


  • Simscape Power Systems
  • Optimization Toolbox
  • Simulink
  • Simulink Design Optimization
  • Simscape

录制的: 2013年4月2日