Main Content

trainingOptions

Options for training deep learning neural network

Description

options = trainingOptions(solverName) returns training options for the optimizer specified by solverName. To train a neural network, use the training options as an input argument to the trainnet function.

example

options = trainingOptions(solverName,Name=Value) returns training options with additional options specified by one or more name-value arguments.

Examples

collapse all

Create a set of options for training a network using stochastic gradient descent with momentum. Reduce the learning rate by a factor of 0.2 every 5 epochs. Set the maximum number of epochs for training to 20, and use a mini-batch with 64 observations at each iteration. Turn on the training progress plot.

options = trainingOptions("sgdm", ...
    LearnRateSchedule="piecewise", ...
    LearnRateDropFactor=0.2, ...
    LearnRateDropPeriod=5, ...
    MaxEpochs=20, ...
    MiniBatchSize=64, ...
    Plots="training-progress")
options = 
  TrainingOptionsSGDM with properties:

                        Momentum: 0.9000
                InitialLearnRate: 0.0100
                       MaxEpochs: 20
               LearnRateSchedule: 'piecewise'
             LearnRateDropFactor: 0.2000
             LearnRateDropPeriod: 5
                   MiniBatchSize: 64
                         Shuffle: 'once'
             CheckpointFrequency: 1
         CheckpointFrequencyUnit: 'epoch'
                  SequenceLength: 'longest'
        PreprocessingEnvironment: 'serial'
                L2Regularization: 1.0000e-04
         GradientThresholdMethod: 'l2norm'
               GradientThreshold: Inf
                         Verbose: 1
                VerboseFrequency: 50
                  ValidationData: []
             ValidationFrequency: 50
              ValidationPatience: Inf
             ObjectiveMetricName: 'loss'
                  CheckpointPath: ''
            ExecutionEnvironment: 'auto'
                       OutputFcn: []
                         Metrics: []
                           Plots: 'training-progress'
            SequencePaddingValue: 0
        SequencePaddingDirection: 'right'
                InputDataFormats: "auto"
               TargetDataFormats: "auto"
         ResetInputNormalization: 1
    BatchNormalizationStatistics: 'auto'
                   OutputNetwork: 'auto'
                    Acceleration: "auto"

This example shows how to monitor the training progress of deep learning networks.

When you train networks for deep learning, plotting various metrics during training enables you to learn how the training is progressing. For example, you can determine if and how quickly the network accuracy is improving, and whether the network is starting to overfit the training data.

This example shows how to monitor training progress for networks trained using the trainnet function. If you are training a network using a custom training loop, use a trainingProgressMonitor object instead to plot metrics during training. For more information, see Monitor Custom Training Loop Progress.

When you set the Plots training option to "training-progress" in trainingOptions and start network training, the trainnet function creates a figure and displays training metrics at every iteration. Each iteration is an estimation of the gradient and an update of the network parameters. If you specify validation data in trainingOptions, then the figure shows validation metrics each time trainnet validates the network. The figure plots the loss and any metrics specified by the Metrics name-value option. By default, the software uses a linear scale for the plots. To specify a logarithmic scale for the y-axis, select the log scale button in the axes toolbar.

During training, you can stop training and return the current state of the network by clicking the stop button in the top-right corner. After you click the stop button, it can take a while for training to complete. Once training is complete, trainnet returns the trained network.

Specify the OutputNetwork training option as "best-validation" to get finalized values that correspond to the iteration with the best validation metric value, where the optimized metric is specified by the ObjectiveMetricName training options. Specify the OutputNetwork training option as "last-iteration" to get finalized metrics that correspond to the last training iteration.

On the right of the pane, view information about the training time and settings. To learn more about training options, see Set Up Parameters and Train Convolutional Neural Network.

To save the training progress plot, click Export as Image in the training window. You can save the plot as a PNG, JPEG, TIFF, or PDF file. You can also save the individual plots using the axes toolbar.

Plot Training Progress During Training

Train a network and plot the training progress during training.

Load the training and test data from the MAT files DigitsDataTrain.mat and DigitsDataTest.mat, respectively. The training and test data sets each contain 5000 images.

load DigitsDataTrain.mat
load DigitsDataTest.mat

Create a dlnetwork object.

net = dlnetwork;

Specify the layers of the classification branch and add them to the network.

layers = [
    imageInputLayer([28 28 1])
    convolution2dLayer(3,8,Padding="same")
    batchNormalizationLayer
    reluLayer   
    maxPooling2dLayer(2,Stride=2)
    convolution2dLayer(3,16,Padding="same")
    batchNormalizationLayer
    reluLayer
    maxPooling2dLayer(2,Stride=2)
    convolution2dLayer(3,32,Padding="same")
    batchNormalizationLayer
    reluLayer
    fullyConnectedLayer(10)
    softmaxLayer];

net = addLayers(net,layers);

Specify options for network training. To validate the network at regular intervals during training, specify validation data. Record the metric values for the accuracy an F-score. To plot training progress during training, set the Plots training option to "training-progress".

options = trainingOptions("sgdm", ...
    MaxEpochs=8, ...
    Metrics = ["accuracy","fscore"], ...
    ValidationData={XTest,labelsTest}, ...
    ValidationFrequency=30, ...
    Verbose=false, ...
    Plots="training-progress");

Train the network.

net = trainnet(XTrain,labelsTrain,net,"crossentropy",options);

Use metrics for early stopping and to return the best network.

Load the training data, which contains 5000 images of digits. Set aside 1000 of the images for network validation.

[XTrain,YTrain] = digitTrain4DArrayData;

idx = randperm(size(XTrain,4),1000);
XValidation = XTrain(:,:,:,idx);
XTrain(:,:,:,idx) = [];
YValidation = YTrain(idx);
YTrain(idx) = [];

Construct a network to classify the digit image data.

net = dlnetwork;

layers = [
    imageInputLayer([28 28 1])
    convolution2dLayer(3,8,Padding="same")
    batchNormalizationLayer
    reluLayer      
    fullyConnectedLayer(10)
    softmaxLayer];

net = addLayers(net,layers);

Specify the training options:

  • Use an SGDM solver for training.

  • Monitor training performance by specifying validation data and validation frequency.

  • Track the accuracy and recall during training. To return the network with the best recall value, specify "recall" as the objective metric and set the output network to "best-validation".

  • Specify the validation patience as 5 so training stops if the recall has not decreased for five iterations.

  • Visualize network training progress plot.

  • Suppress the verbose output.

options = trainingOptions("sgdm", ...
    ValidationData={XValidation,YValidation}, ...
    ValidationFrequency=35, ...
    ValidationPatience=5, ...
    Metrics=["accuracy","recall"], ...
    ObjectiveMetricName="recall", ...
    OutputNetwork="best-validation", ...
    Plots="training-progress", ...
    Verbose=false);

Train the network.

net = trainnet(XTrain,YTrain,net,"crossentropy",options);

Input Arguments

collapse all

Solver for training neural network, specified as one of these values:

The trainBERTDocumentClassifier (Text Analytics Toolbox) function supports the "sgdm", "rmsprop", and "adam" solvers only.

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Example: Plots="training-progress",Metrics="accuracy",Verbose=false specifies to disable the verbose output and display the training progress in a plot that also includes the accuracy metric.

Monitoring

collapse all

Plots to display during neural network training, specified as one of these values:

  • "none" — Do not display plots during training.

  • "training-progress" — Plot training progress.

The contents of the plot depends on the solver that you use.

  • When the solverName argument is "sgdm", "adam", or "rmsprop", the plot shows the mini-batch loss, validation loss, training mini-batch and validation metrics specified by the Metrics option, and additional information about the training progress.

  • When the solverName argument is "lbfgs", the plot shows the training and validation loss, training and validation metrics specified by the Metrics option, and additional information about the training progress.

To programmatically open and close the training progress plot after training, use the show and close functions with the second output of the trainnet function. You can use the show function to view the training progress even if the Plots training option is specified as "none".

To switch the y-axis scale to logarithmic, use the axes toolbar. Training plot axes toolbar with log scale enabled and the tooltip "Log scale y-axis".

Since R2023b

Metrics to track, specified as a character vector or string scalar of a built-in metric name, a string array of names, a built-in or custom metric object, a function handle (@myMetric), a deep.DifferentiableFunction object, or a cell array of names, metric objects, and function handles.

  • Built-in metric name — Specify metrics as a string scalar, character vector, or string array of built-in metric names. Supported values are "accuracy", "auc", "fscore", "precision", "recall", and "rmse".

  • Built-in metric object — If you need more flexibility, you can use built-in metric objects. The software supports these built-in metric objects:

    When you create a built-in metric object, you can specify additional options such as the averaging type and whether the task is single-label or multilabel.

  • Custom metric function handle — If the metric you need is not a built-in metric, then you can specify custom metrics using a function handle. The function must have the syntax metric = metricFunction(Y,T), where Y corresponds to the network predictions and T corresponds to the target responses. For networks with multiple outputs, the syntax must be metric = metricFunction(Y1,…,YN,T1,…TM), where N is the number of outputs and M is the number of targets. For more information, see Define Custom Metric Function.

    Note

    When you have validation data in mini-batches, the software computes the validation metric for each mini-batch and then returns the average of those values. For some metrics, this behavior can result in a different metric value than if you compute the metric using the whole validation set at once. In most cases, the values are similar. To use a custom metric that is not batch-averaged for the validation data, you must create a custom metric object. For more information, see Define Custom Deep Learning Metric Object.

  • deep.DifferentiableFunction object (since R2024a) — Function object with custom backward function. For more information, see Define Custom Deep Learning Operations.

  • Custom metric object — If you need greater customization, then you can define your own custom metric object. For an example that shows how to create a custom metric, see Define Custom F-Beta Score Metric Object. For general information about creating custom metrics, see Define Custom Deep Learning Metric Object. Specify your custom metric as the Metrics option of the trainingOptions function.

This option supports the trainnet and trainBERTDocumentClassifier (Text Analytics Toolbox) functions only.

Example: Metrics=["accuracy","fscore"]

Example: Metrics={"accuracy",@myFunction,precisionObj}

Since R2024a

Name of objective metric to use for early stopping and returning the best network, specified as a string scalar or character vector.

The metric name must be "loss" or match the name of a metric specified by the Metrics name-value argument. Metrics specified using function handles are not supported. To specify the ObjectiveMetricName value as the name of a custom metric, the value of the Maximize property of the custom metric object must be nonempty. For more information, see Define Custom Deep Learning Metric Object.

For more information about specifying the objective metric for early stopping, see ValidationPatience. For more information about returning the best network using the objective metric, see OutputNetwork.

Data Types: char | string

Flag to display training progress information in the command window, specified as 1 (true) or 0 (false).

The content of the verbose output depends on the type of solver.

For stochastic solvers (SGDM, Adam, and RMSProp), the table contains these variables:

VariableDescription
IterationIteration number.
EpochEpoch number.
TimeElapsedTime elapsed in hours, minutes, and seconds.
LearnRateLearning rate.
TrainingLossTraining loss.
ValidationLossValidation loss. If you do not specify validation data, then the software does not display this information.

For the L-BFGS solver, the table contains these variables:

VariableDescription
IterationIteration number.
TimeElapsedTime elapsed in hours, minutes, and seconds.
TrainingLossTraining loss.
ValidationLossValidation loss. If you do not specify validation data, then the software does not display this information.
GradientNormNorm of the gradients.
StepNormNorm of the steps.

If you specify additional metrics in the training options, then they also appear in the verbose output. For example, if you set the Metrics training option to "accuracy", then the information includes the TrainingAccuracy and ValidationAccuracy variables.

When training stops, the verbose output displays the reason for stopping.

To specify validation data, use the ValidationData training option.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | logical

Frequency of verbose printing, which is the number of iterations between printing to the Command Window, specified as a positive integer.

If you validate the neural network during training, then the software also prints to the command window every time validation occurs.

To enable this property, set the Verbose training option to 1 (true).

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Output functions to call during training, specified as a function handle or cell array of function handles. The software calls the functions once before the start of training, after each iteration, and once when training is complete.

The functions must have the syntax stopFlag = f(info), where info is a structure containing information about the training progress, and stopFlag is a scalar that indicates to stop training early. If stopFlag is 1 (true), then the software stops training. Otherwise, the software continues training.

The trainnet function passes the output function the structure info.

For stochastic solvers (SGDM, Adam, and RMSProp), info contains these fields:

FieldDescription
EpochEpoch number
IterationIteration number
TimeElapsedTime since start of training
LearnRateIteration learn rate
TrainingLossIteration training loss
ValidationLossValidation loss, if specified and evaluated at iteration.
StateIteration training state, specified as "start", "iteration", or "done".

For the L-BFGS solver, info contains these fields:

FieldDescription
IterationIteration number
TimeElapsedTime elapsed in hours, minutes, and seconds
TrainingLossTraining loss
ValidationLossValidation loss. If you do not specify validation data, then the software does not display this information.
GradientNormNorm of the gradients
StepNormNorm of the steps
StateIteration training state, specified as "start", "iteration", or "done".

If you specify additional metrics in the training options, then they also appear in the training information. For example, if you set the Metrics training option to "accuracy", then the information includes the TrainingAccuracy and ValidationAccuracy fields.

If a field is not calculated or relevant for a certain call to the output functions, then that field contains an empty array.

For an example showing how to use output functions, see Custom Stopping Criteria for Deep Learning Training.

Data Types: function_handle | cell

Data Formats

collapse all

Since R2023b

Description of the input data dimensions, specified as a string array, character vector, or cell array of character vectors.

If InputDataFormats is "auto", then the software uses the formats expected by the network input. Otherwise, the software uses the specified formats for the corresponding network input.

A data format is a string of characters, where each character describes the type of the corresponding data dimension.

The characters are:

  • "S" — Spatial

  • "C" — Channel

  • "B" — Batch

  • "T" — Time

  • "U" — Unspecified

For example, consider an array containing a batch of sequences where the first, second, and third dimensions correspond to channels, observations, and time steps, respectively. You can specify that this array has the format "CBT" (channel, batch, time).

You can specify multiple dimensions labeled "S" or "U". You can use the labels "C", "B", and "T" at most once. The software ignores singleton trailing "U" dimensions after the second dimension.

For a neural networks with multiple inputs net, specify an array of input data formats, where InputDataFormats(i) corresponds to the input net.InputNames(i).

For more information, see Deep Learning Data Formats.

Data Types: char | string | cell

Since R2023b

Description of the target data dimensions, specified as one of these values:

  • "auto" — If the target data has the same number of dimensions as the input data, then the trainnet function uses the format specified by InputDataFormats. If the target data has a different number of dimensions to the input data, then the trainnet function uses the format expected by the loss function.

  • String array, character vector, or cell array of character vectors — The trainnet function uses the data formats you specify.

A data format is a string of characters, where each character describes the type of the corresponding data dimension.

The characters are:

  • "S" — Spatial

  • "C" — Channel

  • "B" — Batch

  • "T" — Time

  • "U" — Unspecified

For example, consider an array containing a batch of sequences where the first, second, and third dimensions correspond to channels, observations, and time steps, respectively. You can specify that this array has the format "CBT" (channel, batch, time).

You can specify multiple dimensions labeled "S" or "U". You can use the labels "C", "B", and "T" at most once. The software ignores singleton trailing "U" dimensions after the second dimension.

For more information, see Deep Learning Data Formats.

Data Types: char | string | cell

Stochastic Solver Options

collapse all

Maximum number of epochs (full passes of the data) to use for training, specified as a positive integer.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Size of the mini-batch to use for each training iteration, specified as a positive integer. A mini-batch is a subset of the training set that is used to evaluate the gradient of the loss function and update the weights.

If the mini-batch size does not evenly divide the number of training samples, then the software discards the training data that does not fit into the final complete mini-batch of each epoch. If the mini-batch size is smaller than the number of training samples, then the software does not discard any data.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Option for data shuffling, specified as one of these values:

  • "once" — Shuffle the training and validation data once before training.

  • "never" — Do not shuffle the data.

  • "every-epoch" — Shuffle the training data before each training epoch, and shuffle the validation data before each neural network validation. If the mini-batch size does not evenly divide the number of training samples, then the software discards the training data that does not fit into the final complete mini-batch of each epoch. To avoid discarding the same data every epoch, set the Shuffle training option to "every-epoch".

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Initial learning rate used for training, specified as a positive scalar.

If the learning rate is too low, then training can take a long time. If the learning rate is too high, then training might reach a suboptimal result or diverge.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

When solverName is "sgdm", the default value is 0.01. When solverName is "rmsprop" or "adam", the default value is 0.001.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Option for dropping the learning rate during training, specified as of these values:

  • "none" — Keep learning rate constant throughout training.

  • "piecewise" — Update the learning rate periodically by multiplying it by a drop factor. To specify the period, use the LearnRateDropPeriod training option. To specify the drop factor, use the LearnRateDropFactor training option.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Number of epochs for dropping the learning rate, specified as a positive integer. This option is valid only when the LearnRateSchedule training option is "piecewise".

The software multiplies the global learning rate with the drop factor every time the specified number of epochs passes. Specify the drop factor using the LearnRateDropFactor training option.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Factor for dropping the learning rate, specified as a scalar from 0 to 1. This option is valid only when the LearnRateSchedule training option is "piecewise".

LearnRateDropFactor is a multiplicative factor to apply to the learning rate every time a certain number of epochs passes. Specify the number of epochs using the LearnRateDropPeriod training option.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Contribution of the parameter update step of the previous iteration to the current iteration of stochastic gradient descent with momentum, specified as a scalar from 0 to 1.

A value of 0 means no contribution from the previous step, whereas a value of 1 means maximal contribution from the previous step. The default value works well for most tasks.

This option supports the SGDM solver only (when the solverName argument is "sgdm").

For more information, see Stochastic Gradient Descent with Momentum.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Decay rate of gradient moving average for the Adam solver, specified as a nonnegative scalar less than 1. The gradient decay rate is denoted by β1 in the Adaptive Moment Estimation section.

This option supports the Adam solver only (when the solverName argument is "adam").

For more information, see Adaptive Moment Estimation.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Decay rate of squared gradient moving average for the Adam and RMSProp solvers, specified as a nonnegative scalar less than 1. The squared gradient decay rate is denoted by β2 in [4].

Typical values of the decay rate are 0.9, 0.99, and 0.999, corresponding to averaging lengths of 10, 100, and 1000 parameter updates, respectively.

This option supports the Adam and RMSProp solvers only (when the solverName argument is "adam" or "rmsprop").

The default value is 0.999 for the Adam solver. The default value is 0.9 for the RMSProp solver.

For more information, see Adaptive Moment Estimation and Root Mean Square Propagation.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Denominator offset for Adam and RMSProp solvers, specified as a positive scalar.

The solver adds the offset to the denominator in the neural network parameter updates to avoid division by zero. The default value works well for most tasks.

This option supports the Adam and RMSProp solvers only (when the solverName argument is "adam" or "rmsprop").

For more information, see Adaptive Moment Estimation and Root Mean Square Propagation.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

L-BFGS Solver Options

collapse all

Since R2023b

Maximum number of iterations to use for training, specified as a positive integer.

The L-BFGS solver is a full-batch solver, which means that it processes the entire training set in a single iteration.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Since R2023b

Method to find suitable learning rate, specified as one of these values:

  • "weak-wolfe" — Search for a learning rate that satisfies the weak Wolfe conditions. This method maintains a positive definite approximation of the inverse Hessian matrix.

  • "strong-wolfe" — Search for a learning rate that satisfies the strong Wolfe conditions. This method maintains a positive definite approximation of the inverse Hessian matrix.

  • "backtracking" — Search for a learning rate that satisfies sufficient decrease conditions. This method does not maintain a positive definite approximation of the inverse Hessian matrix.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Since R2023b

Number of state updates to store, specified as a positive integer. Values between 3 and 20 suit most tasks.

The L-BFGS algorithm uses a history of gradient calculations to approximate the Hessian matrix recursively. For more information, see Limited-Memory BFGS.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Since R2023b

Initial value that characterizes the approximate inverse Hessian matrix, specified as a positive scalar.

To save memory, the L-BFGS algorithm does not store and invert the dense Hessian matrix B. Instead, the algorithm uses the approximation Bkm1λkI, where m is the history size, the inverse Hessian factor λk is a scalar, and I is the identity matrix. The algorithm then stores the scalar inverse Hessian factor only. The algorithm updates the inverse Hessian factor at each step.

The initial inverse hessian factor is the value of λ0.

For more information, see Limited-Memory BFGS.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Since R2023b

Maximum number of line search iterations to determine the learning rate, specified as a positive integer.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Since R2023b

Relative gradient tolerance, specified as a positive scalar.

The software stops training when the relative gradient is less than or equal to GradientTolerance.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Since R2023b

Step size tolerance, specified as a positive scalar.

The software stops training when the step that the algorithm takes is less than or equal to StepTolerance.

This option supports the L-BFGS solver only (when the solverName argument is "lbfgs").

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Validation

collapse all

Data to use for validation during training, specified as [], a datastore, a table, a cell array, or a minibatchqueue object that contains the validation predictors and targets.

During training, the software uses the validation data to calculate the validation loss and metric values. To specify the validation frequency, use the ValidationFrequency training option. You can also use the validation data to stop training automatically when the validation objective metric stops improving. By default, the objective metric is set to the loss. To turn on automatic validation stopping, use the ValidationPatience training option.

If ValidationData is [], then the software does not validate the neural network during training.

If your neural network has layers that behave differently during prediction than during training (for example, dropout layers), then the validation loss can be lower than the training loss.

The software shuffles the validation data according to the Shuffle training option. If Shuffle is "every-epoch", then the software shuffles the validation data before each neural network validation.

The supported formats depend on the training function that you use.

trainnet Function

Specify the validation data as a datastore, minibatchqueue object, or the cell array {predictors,targets}, where predictors contains the validation predictors and targets contains the validation targets. Specify the validation predictors and targets using any of the formats supported by the trainnet function.

For more information, see the input arguments of the trainnet function.

trainBERTDocumentClassifier Function (Text Analytics Toolbox)

Specify the validation data as one of these values:

  • Cell array {documents,targets}, where documents contains the input documents, and targets contains the document labels.

  • Table, where the first variable contains the input documents and the second variable contains the document labels.

For more information, see the input arguments of the trainBERTDocumentClassifier (Text Analytics Toolbox) function.

Frequency of neural network validation in number of iterations, specified as a positive integer.

The ValidationFrequency value is the number of iterations between evaluations of validation metrics. To specify validation data, use the ValidationData training option.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Patience of validation stopping of neural network training, specified as a positive integer or Inf.

ValidationPatience specifies the number of times that the objective metric on the validation set can be worse than or equal to the previous best value before neural network training stops. If ValidationPatience is Inf, then the values of the validation metric do not cause training to stop early. The software aims to maximize or minimize the metric, as specified by the Maximize property of the metric. When the objective metric is "loss", the software aims to minimize the loss value.

The returned neural network depends on the OutputNetwork training option. To return the neural network with the best validation metric value, set the OutputNetwork training option to "best-validation".

Before R2024a: The software computes the validation patience using the validation loss value.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Neural network to return when training completes, specified as one of the following:

  • "auto" – Use "best-validation" if ValidationData is specified. Otherwise, use "last-iteration".

  • "best-validation" – Return the neural network corresponding to the training iteration with the best validation metric value, where the metric to optimize is specified by the ObjectiveMetricName option. To use this option, you must specify the ValidationData training option.

  • "last-iteration" – Return the neural network corresponding to the last training iteration.

Regularization and Normalization

collapse all

Factor for L2 regularization (weight decay), specified as a nonnegative scalar. For more information, see L2 Regularization.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Option to reset input layer normalization, specified as one of the following:

  • 1 (true) — Reset the input layer normalization statistics and recalculate them at training time.

  • 0 (false) — Calculate normalization statistics at training time when they are empty.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | logical

Mode to evaluate the statistics in batch normalization layers, specified as one of the following:

  • "population" — Use the population statistics. After training, the software finalizes the statistics by passing through the training data once more and uses the resulting mean and variance.

  • "moving" — Approximate the statistics during training using a running estimate given by update steps

    μ*=λμμ^+(1λμ)μσ2*=λσ2σ2^+(1-λσ2)σ2

    where μ* and σ2* denote the updated mean and variance, respectively, λμ and λσ2 denote the mean and variance decay values, respectively, μ^ and σ2^ denote the mean and variance of the layer input, respectively, and μ and σ2 denote the latest values of the moving mean and variance values, respectively. After training, the software uses the most recent value of the moving mean and variance statistics. This option supports CPU and single GPU training only.

  • "auto" — Use the "moving" option.

Gradient Clipping

collapse all

Gradient threshold, specified as Inf or a positive scalar. If the gradient exceeds the value of GradientThreshold, then the gradient is clipped according to the GradientThresholdMethod training option.

For more information, see Gradient Clipping.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Gradient threshold method used to clip gradient values that exceed the gradient threshold, specified as one of the following:

  • "l2norm" — If the L2 norm of the gradient of a learnable parameter is larger than GradientThreshold, then scale the gradient so that the L2 norm equals GradientThreshold.

  • "global-l2norm" — If the global L2 norm, L, is larger than GradientThreshold, then scale all gradients by a factor of GradientThreshold/L. The global L2 norm considers all learnable parameters.

  • "absolute-value" — If the absolute value of an individual partial derivative in the gradient of a learnable parameter is larger than GradientThreshold, then scale the partial derivative to have magnitude equal to GradientThreshold and retain the sign of the partial derivative.

For more information, see Gradient Clipping.

Sequence

collapse all

Option to pad, truncate, or split input sequences, specified as one of these values:

  • "longest" — Pad sequences in each mini-batch to have the same length as the longest sequence. This option does not discard any data, though padding can introduce noise to the neural network.

  • "shortest" — Truncate sequences in each mini-batch to have the same length as the shortest sequence. This option ensures that no padding is added, at the cost of discarding data.

To learn more about the effect of padding and truncating sequences, see Sequence Padding and Truncation.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | char | string

Direction of padding or truncation, specified as one of the following:

  • "right" — Pad or truncate sequences on the right. The sequences start at the same time step and the software truncates or adds padding to the end of the sequences.

  • "left" — Pad or truncate sequences on the left. The software truncates or adds padding to the start of the sequences so that the sequences end at the same time step.

Because recurrent layers process sequence data one time step at a time, when the recurrent layer OutputMode property is "last", any padding in the final time steps can negatively influence the layer output. To pad or truncate sequence data on the left, set the SequencePaddingDirection option to "left".

For sequence-to-sequence neural networks (when the OutputMode property is "sequence" for each recurrent layer), any padding in the first time steps can negatively influence the predictions for the earlier time steps. To pad or truncate sequence data on the right, set the SequencePaddingDirection option to "right".

To learn more about the effect of padding and truncating sequences, see Sequence Padding and Truncation.

Value by which to pad input sequences, specified as a scalar.

Do not pad sequences with NaN, because doing so can propagate errors throughout the neural network.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Hardware and Acceleration

collapse all

Hardware resource for training neural network, specified as one of these values:

  • "auto" – Use a local GPU if one is available. Otherwise, use the local CPU.

  • "cpu" – Use the local CPU.

  • "gpu" – Use the local GPU.

  • "multi-gpu" – Use multiple GPUs on one machine, using a local parallel pool based on your default cluster profile. If there is no current parallel pool, the software starts a parallel pool with pool size equal to the number of available GPUs.

  • "parallel-auto" – Use a local or remote parallel pool. If there is no current parallel pool, the software starts one using the default cluster profile. If the pool has access to GPUs, then only workers with a unique GPU perform training computation and excess workers become idle. If the pool does not have GPUs, then training takes place on all available CPU workers instead. (since R2024a)

    Before R2024a: Use "parallel" instead.

  • "parallel-cpu" – Use CPU resources in a local or remote parallel pool, ignoring any GPUs. If there is no current parallel pool, the software starts one using the default cluster profile. (since R2023b)

  • "parallel-gpu" – Use GPUs in a local or remote parallel pool. Excess workers become idle. If there is no current parallel pool, the software starts one using the default cluster profile. (since R2023b)

The "gpu", "multi-gpu", "parallel-auto", "parallel-cpu", and "parallel-gpu" options require Parallel Computing Toolbox™. To use a GPU for deep learning, you must also have a supported GPU device. For information on supported devices, see GPU Computing Requirements (Parallel Computing Toolbox). If you choose one of these options and Parallel Computing Toolbox or a suitable GPU is not available, then the software returns an error.

For more information on when to use the different execution environments, see Scale Up Deep Learning in Parallel, on GPUs, and in the Cloud.

To see an improvement in performance when training in parallel, try scaling up the MiniBatchSize and InitialLearnRate training options by the number of GPUs.

The "multi-gpu", "parallel-auto", "parallel-cpu", and "parallel-gpu" options support stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Since R2024a

Environment for fetching and preprocessing data from a datastore during training, specified as one of these values:

  • "serial" – Fetch and preprocess data in serial.

  • "background" – Fetch and preprocess data using the background pool.

  • "parallel" – Fetch and preprocess data using parallel workers. The software opens a parallel pool using the default profile, if a local pool is not currently open. Non-local parallel pools are not supported. Using this option requires Parallel Computing Toolbox. This option is not supported when training in parallel (when the ExecutionEnvironment option is "parallel-auto", "parallel-cpu", "parallel-gpu", or "multi-gpu").

To use the "background" or "parallel" options, the input datastore must be subsettable or partitionable. Custom datastores must implement the matlab.io.datastore.Subsettable class.

The "background" and "parallel" options are not supported when the Shuffle option is "never".

Use the "background" or "parallel" options when your mini-batches require significant preprocessing. For more information about the preprocessing environment, see Use Datastore for Parallel Training and Background Preprocessing.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Before R2024a: To preprocess data in parallel, set the DispatchInBackground training option to 1 (true).

Since R2024a

Performance optimization, specified as one of these values:

  • "auto" – Automatically apply a number of optimizations suitable for the input network and hardware resources.

  • "none" – Disable all optimizations.

Checkpoints

collapse all

Path for saving the checkpoint neural networks, specified as a string scalar or character vector.

  • If you do not specify a path (that is, you use the default ""), then the software does not save any checkpoint neural networks.

  • If you specify a path, then the software saves checkpoint neural networks to this path and assigns a unique name to each neural network. You can then load any checkpoint neural network and resume training from that neural network.

    If the folder does not exist, then you must first create it before specifying the path for saving the checkpoint neural networks. If the path you specify does not exist, then the software throws an error.

Data Types: char | string

Frequency of saving checkpoint neural networks, specified as a positive integer.

If solverName is "lbfgs" or CheckpointFrequencyUnit is "iteration", then the software saves checkpoint neural networks every CheckpointFrequency iterations. Otherwise, the software saves checkpoint neural networks every CheckpointFrequency epochs.

When solverName is "sgdm", "adam", or "rmsprop", the default value is 1. When solverName is "lbfgs", default value is 30.

This option only has an effect when CheckpointPath is nonempty.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Checkpoint frequency unit, specified as "epoch" or "iteration".

If CheckpointFrequencyUnit is "epoch", then the software saves checkpoint neural networks every CheckpointFrequency epochs.

If CheckpointFrequencyUnit is "iteration", then the software saves checkpoint neural networks every CheckpointFrequency iterations.

This option only has an effect when CheckpointPath is nonempty.

This option supports stochastic solvers only (when the solverName argument is "sgdm", "adam", or "rmsprop").

Output Arguments

collapse all

Training options, returned as a TrainingOptionsSGDM, TrainingOptionsRMSProp, TrainingOptionsADAM, or TrainingOptionsLBFGS object. To train a neural network, use the training options as an input argument to the trainnet function.

If solverName is "sgdm", "rmsprop", "adam", or "lbfgs", then the training options are returned as a TrainingOptionsSGDM, TrainingOptionsRMSProp, TrainingOptionsADAM, or TrainingOptionsLBFGS object, respectively.

Tips

  • For most deep learning tasks, you can use a pretrained neural network and adapt it to your own data. For an example showing how to use transfer learning to retrain a convolutional neural network to classify a new set of images, see Retrain Neural Network to Classify New Images. Alternatively, you can create and train neural networks from scratch using the trainnet and trainingOptions functions.

    If the trainingOptions function does not provide the training options that you need for your task, then you can create a custom training loop using automatic differentiation. To learn more, see Train Network Using Custom Training Loop.

    If the trainnet function does not provide the loss function that you need for your task, then you can specify a custom loss function to the trainnet as a function handle. For loss functions that require more inputs than the predictions and targets (for example, loss functions that require access to the neural network or additional inputs), train the model using a custom training loop. To learn more, see Train Network Using Custom Training Loop.

    If Deep Learning Toolbox™ does not provide the layers you need for your task, then you can create a custom layer. To learn more, see Define Custom Deep Learning Layers. For models that cannot be specified as networks of layers, you can define the model as a function. To learn more, see Train Network Using Model Function.

    For more information about which training method to use for which task, see Train Deep Learning Model in MATLAB.

Algorithms

collapse all

Initial Weights and Biases

For convolutional and fully connected layers, the initialization for the weights and biases are given by the WeightsInitializer and BiasInitializer properties of the layers, respectively. For examples showing how to change the initialization for the weights and biases, see Specify Initial Weights and Biases in Convolutional Layer and Specify Initial Weights and Biases in Fully Connected Layer.

Stochastic Gradient Descent

The standard gradient descent algorithm updates the network parameters (weights and biases) to minimize the loss function by taking small steps at each iteration in the direction of the negative gradient of the loss,

θ+1=θαE(θ),

where is the iteration number, α>0 is the learning rate, θ is the parameter vector, and E(θ) is the loss function. In the standard gradient descent algorithm, the gradient of the loss function, E(θ), is evaluated using the entire training set, and the standard gradient descent algorithm uses the entire data set at once.

By contrast, at each iteration the stochastic gradient descent algorithm evaluates the gradient and updates the parameters using a subset of the training data. A different subset, called a mini-batch, is used at each iteration. The full pass of the training algorithm over the entire training set using mini-batches is one epoch. Stochastic gradient descent is stochastic because the parameter updates computed using a mini-batch is a noisy estimate of the parameter update that would result from using the full data set.

Stochastic Gradient Descent with Momentum

The stochastic gradient descent algorithm can oscillate along the path of steepest descent towards the optimum. Adding a momentum term to the parameter update is one way to reduce this oscillation [2]. The stochastic gradient descent with momentum (SGDM) update is

θ+1=θαE(θ)+γ(θθ1),

where the learning rate α and the momentum value γ determine the contribution of the previous gradient step to the current iteration.

Root Mean Square Propagation

Stochastic gradient descent with momentum uses a single learning rate for all the parameters. Other optimization algorithms seek to improve network training by using learning rates that differ by parameter and can automatically adapt to the loss function being optimized. Root mean square propagation (RMSProp) is one such algorithm. It keeps a moving average of the element-wise squares of the parameter gradients,

v=β2v1+(1β2)[E(θ)]2

β2 is the squared gradient decay factor of the moving average. Common values of the decay rate are 0.9, 0.99, and 0.999. The corresponding averaging lengths of the squared gradients equal 1/(1-β2), that is, 10, 100, and 1000 parameter updates, respectively. The RMSProp algorithm uses this moving average to normalize the updates of each parameter individually,

θ+1=θαE(θ)v+ϵ

where the division is performed element-wise. Using RMSProp effectively decreases the learning rates of parameters with large gradients and increases the learning rates of parameters with small gradients. ɛ is a small constant added to avoid division by zero.

Adaptive Moment Estimation

Adaptive moment estimation (Adam) [4] uses a parameter update that is similar to RMSProp, but with an added momentum term. It keeps an element-wise moving average of both the parameter gradients and their squared values,

m=β1m1+(1β1)E(θ)

v=β2v1+(1β2)[E(θ)]2

The β1 and β2 decay rates are the gradient decay and squared gradient decay factors, respectively. Adam uses the moving averages to update the network parameters as

θ+1=θαmlvl+ϵ

The value α is the learning rate. If gradients over many iterations are similar, then using a moving average of the gradient enables the parameter updates to pick up momentum in a certain direction. If the gradients contain mostly noise, then the moving average of the gradient becomes smaller, and so the parameter updates become smaller too. The full Adam update also includes a mechanism to correct a bias the appears in the beginning of training. For more information, see [4].

Limited-Memory BFGS

The L-BFGS algorithm [5] is a quasi-Newton method that approximates the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm. Use the L-BFGS algorithm for small networks and data sets that you can process in a single batch.

The algorithm updates learnable parameters W at iteration k+1 using the update step given by

Wk+1=WkηkBk1J(Wk),

where Wk denotes the weights at iteration k, ηk is the learning rate at iteration k, Bk is an approximation of the Hessian matrix at iteration k, and J(Wk) denotes the gradients of the loss with respect to the learnable parameters at iteration k.

The L-BFGS algorithm computes the matrix-vector product Bk1J(Wk) directly. The algorithm does not require computing the inverse of Bk.

To save memory, the L-BFGS algorithm does not store and invert the dense Hessian matrix B. Instead, the algorithm uses the approximation Bkm1λkI, where m is the history size, the inverse Hessian factor λk is a scalar, and I is the identity matrix. The algorithm then stores the scalar inverse Hessian factor only. The algorithm updates the inverse Hessian factor at each step.

To compute the matrix-vector product Bk1J(Wk) directly, the L-BFGS algorithm uses this recursive algorithm:

  1. Set r=Bkm1J(Wk), where m is the history size.

  2. For i=m,,1:

    1. Let β=1skiykiykir, where ski and yki are the step and gradient differences for iteration ki, respectively.

    2. Set r=r+ski(akiβ), where a is derived from s, y, and the gradients of the loss with respect to the loss function. For more information, see [5].

  3. Return Bk1J(Wk)=r.

Gradient Clipping

If the gradients increase in magnitude exponentially, then the training is unstable and can diverge within a few iterations. This "gradient explosion" is indicated by a training loss that goes to NaN or Inf. Gradient clipping helps prevent gradient explosion by stabilizing the training at higher learning rates and in the presence of outliers [3]. Gradient clipping enables networks to be trained faster, and does not usually impact the accuracy of the learned task.

There are two types of gradient clipping.

  • Norm-based gradient clipping rescales the gradient based on a threshold, and does not change the direction of the gradient. The "l2norm" and "global-l2norm" values of GradientThresholdMethod are norm-based gradient clipping methods.

  • Value-based gradient clipping clips any partial derivative greater than the threshold, which can result in the gradient arbitrarily changing direction. Value-based gradient clipping can have unpredictable behavior, but sufficiently small changes do not cause the network to diverge. The "absolute-value" value of GradientThresholdMethod is a value-based gradient clipping method.

L2 Regularization

Adding a regularization term for the weights to the loss function E(θ) is one way to reduce overfitting [1], [2]. The regularization term is also called weight decay. The loss function with the regularization term takes the form

ER(θ)=E(θ)+λΩ(w),

where w is the weight vector, λ is the regularization factor (coefficient), and the regularization function Ω(w) is

Ω(w)=12wTw.

Note that the biases are not regularized [2]. You can specify the regularization factor λ by using the L2Regularization training option. You can also specify different regularization factors for different layers and parameters.

The loss function that the software uses for network training includes the regularization term. However, the loss value displayed in the command window and training progress plot during training is the loss on the data only and does not include the regularization term.

References

[1] Bishop, C. M. Pattern Recognition and Machine Learning. Springer, New York, NY, 2006.

[2] Murphy, K. P. Machine Learning: A Probabilistic Perspective. The MIT Press, Cambridge, Massachusetts, 2012.

[3] Pascanu, R., T. Mikolov, and Y. Bengio. "On the difficulty of training recurrent neural networks". Proceedings of the 30th International Conference on Machine Learning. Vol. 28(3), 2013, pp. 1310–1318.

[4] Kingma, Diederik, and Jimmy Ba. "Adam: A method for stochastic optimization." arXiv preprint arXiv:1412.6980 (2014).

[5] Liu, Dong C., and Jorge Nocedal. "On the limited memory BFGS method for large scale optimization." Mathematical programming 45, no. 1 (August 1989): 503-528. https://doi.org/10.1007/BF01589116.

Version History

Introduced in R2016a

expand all